12
GBGB
GBGB
GB
When the time count is equal to 0 the instrument
comes back to the SP set point and the output 2
will be reset.
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
Timer mode 4 [P22 = 8]Timer mode 4 [P22 = 8]
Timer mode 4 [P22 = 8]Timer mode 4 [P22 = 8]
Timer mode 4 [P22 = 8]
The instrument operates using SP set point and
the timer is normally reset.
When the instrument detects the transfer from
contact open to close it selects SP2 as operative
set point and starts the time count down.
Note Note
Note Note
Note that the guarantee soak function can be
applied to this timer mode (see P28 parameter)
When the time count is equal to 0 the instrument
comes back to the SP set point.
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
Timer mode 5 [P22 = 9]Timer mode 5 [P22 = 9]
Timer mode 5 [P22 = 9]Timer mode 5 [P22 = 9]
Timer mode 5 [P22 = 9]
The instrument start in "Power OFF" mode and it
remains in "Power OFF" mode until the contact is
closed.
When the contact has been opened the instrument
starts the control using SP set point and starts the
time count down.
Notes:Notes:
Notes:Notes:
Notes:
1) The guarantee soak function can be applied to
this timer mode (see P28 parameter)
2) The transfer from "Power OFF" mode to
AUTOMATIC mode starts the "Soft start" and the
"alarm masking" functions (if programmed).
When the time count is equal to 0 the instrument
comes back to the "Power OFF" mode and the
output 2 will be energized.
Timer mode 1 [P22 = 5]Timer mode 1 [P22 = 5]
Timer mode 1 [P22 = 5]Timer mode 1 [P22 = 5]
Timer mode 1 [P22 = 5]
If the logic input remains in open condition for
more than a programmed time the instrument goes
automatically at a stand by temperature (SP2).
The time count is reset when the logic input is
closed.
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
Timer mode 2 [P22 = 6]Timer mode 2 [P22 = 6]
Timer mode 2 [P22 = 6]Timer mode 2 [P22 = 6]
Timer mode 2 [P22 = 6]
When the contact is closed, the instrument
controls using SP as operative set point.
When the contact has been opened the instrument
selects SP2 as operative set point and starts the
time count down.
Note Note
Note Note
Note that the guarantee soak function can be
applied to this timer mode (see P28 parameter)
When the time count is equal to 0 the instrument
comes back to the SP set point and the output 2
will be energized.
The Out 2 reset will be made when the logic input
will be closed again.
For other details see paragraph
"5.7 Timer"5.7 Timer
"5.7 Timer"5.7 Timer
"5.7 Timer
modes description".modes description".
modes description".modes description".
modes description".
Timer mode 3 [P22 = 7]Timer mode 3 [P22 = 7]
Timer mode 3 [P22 = 7]Timer mode 3 [P22 = 7]
Timer mode 3 [P22 = 7]
When the contact is closed, the instrument
controls using SP as operative set point.
When the contact has been opened the instrument
operate as follows:
- it selects SP2 as operative set point
- it starts the time count down
- it energizes the Output 2
Note Note
Note Note
Note that the guarantee soak function can be
applied to this timer mode (see P28 parameter)
1601-03-1-CX.pmd 13/01/2004, 10.4212
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals